Posts Tagged ‘C&P Engineering Services’

HazardEx Ellesmere Port

Sunday, February 22nd, 2015

HazardEx Ellesmere Port – 25th February 2015

HazardEx Ellesmere Port will be the final of four events that C&P Engineering Services has been exhibiting at over the past 6 months. HazardEx Ellesmere Port is set to take place at The Holiday Inn Hotel, Lower Mersey Street, Ellesmere Port. CH65 2AL on the 25th February 2015. Ellesmere Port is the final UK regional event. Senior UK HSE and UKPIA staff are already confirmed speakers for these events. ATEX & DSEAR.

The conference is aimed at hazardous operations personnel in the process industries such as the oil & gas, pharmaceutical, chemical, utilities, new energy and food & beverage industries.

Read More About: HazardEx Ellesmere Port – UK Safety Process Conference Exhibition

HazardEx Ellesmere Port

Inspection – Verification – Installation – Modification – Repair



IEC Inspections

Sunday, February 15th, 2015

ATEX Inspections

IEC Inspections – Hazardous Area Ex Inspections

C&P Engineering Services conducts ATEX, DSEAR, NEC or IEC inspections following the BS EN or IEC 60079-17 Standards.

The Electrotechnical Commission Standards are the industry standard for Hazardous Area Inspections and are used worldwide by operators, manufacturers and distributors in the oil, gas, petrochemical, offshore, onshore,  chemical, steel, power generation and heavy engineering industries. Our inspectors utilise the IEC 600079-17 (The Inspection and Maintenance of Electrical Installations in Hazardous Areas) Standard for all inspections.
We specialise in providing IEC inspections, installation, maitenance and consultancy services.

IEC Inspections and Consultancy Services

  • IEC Inspections – Electrical and Instrumentation
  • IEC  Inspections – Mechanical
  • IEC Inspections – Strategy Development and Implementation
  • Verification and Compliance
  • Installation
  • Ex Register Development and Updates
  • PDA and Seoftware Options
  • Modifications and Repair Services
  • .Gap Analysis
  • IEC Inspections – Trade Awareness Training
  • Explosion Certified Documentation
  • Equipment Manuals

Our IEC inspections will assist your organisation demonstrate that all installed electrical and mechanical equipment is certified, has the right protection concept for the potentially explosive atmosphere and is safe to use and fit for purpose.

IEC Inspection Documentation

  • Certified IEC Inspections Report (Visual, Close or Detailed Inspections)
  • Certified IEC  Installation Certificate (For Installations by C&P Engineering Services)
  • Ex Register
  • Summary Report – Recommendations, Corrective Actions and Advisory Notes
  • Signed Inspection Check-Sheets in line with BS EN or  IEC 60079-17: 2014
  • Explosion Protection Cerificates/Documents
  • Equipement Manuals
IEC 60079 Associated Standards

The following relevant associated standards are also utilised:

IEC 60079-0 Part 0: Equipment General Requirements
IEC 60079-1 Part 1: Equipment protection by flameproof enclosures “d”
IEC 60079-2 Part 2: Equipment protection by pressurized enclosures “p”
IEC 60079-7 Part 7: Equipment protection by increased safety “e”
IEC 60079-10 Part 10: Classification of hazardous areas
IEC 60079-11 Part 11: Equipment protection by intrinsic safety “i”
IEC 60079-14 Part 14: Electrical Installations in Hazardous Areas (other than mines)
IEC 60079-15 Part 15: Construction, test and making of type of protection “n” electrical apparatus

Call +44(0)1792 897002 or email info@nullcpengineering.co.uk for more information and technical assistance

We have been Assessed and Certified by the NICEIC (National Inspection Council for Electrical Installation Contractors) as a Hazardous Area Electrical and Instrumentation Services contractor and we have the technical capability to carry out Electrical and Instrumentation Services work in areas where potentially explosive atmospheres may be expected to occur in the form of explosive gases, vapours or combustible dusts.



ATEX Inspections

Sunday, February 15th, 2015

ATEX Inspections

ATEX Inspections – Hazardous Area Ex Inspections

We provide ATEX Inspections on a worldwide basis to organisations, operators, manufacturers and distributors, upstream and downstream and across many industries within the oil, gas, petrochemical, chemical, offshore, power generation, steel and heavy engineering industries.

What is ATEX?

ATEX is an abbreviation for ” ATmosphere EXplosible”. At the same time, ATEX is the abbreviated name of the European Directive 94/9/EC concerning the placing on the market of explosion-proof electrical and mechanical equipment, components and protective systems. It came into force on 1 July 2003, and all new equipment and protective systems have been subject to it since that date. The transitional period allowed for the conversion of existing equipment that was manufactured and put into operation prior to 1 July 2003 expired with effect from 1 July 2006. This means that such equipment must also be fully compliant with ATEX 94/9/EC from 1 July 2006 onwards.

The ATEX directive places responsibility on employers control or eliminate the risks arising from operations that may contain potentially explosive atmospheres and to ensure they that the employees have a safe place of work.Employers must also be able to demonstrate that they have taken a consideration of risk for the overall protection safety measures and must provide evidence for any explosion protection measure that is implemented.In order to verify compliance and the integrity of electrical explosion protection safety equiment and measures, the international standard IEC 60079-17 provides guidance in order to inspect and maintain all electrical equipment within a hazardous ATEX area.

ATEX Inspections – Our Services

We specialise in providing ATEX inspections, installation, maitenance and consultancy services and are able to offer the follwing services

  • ATEX Inspections – Electrical and Instrumentation
  • ATEX  Inspections – Mechanical
  • ATEX Inspections – Strategy Development and Implementation
  • Verification and Compliance
  • ATEX Installation
  • Ex Register Development and Updates
  • PDA and Seoftware Options
  • Modifications and Repair Services
  • Gap Analysis
  • ATEX Inspections – Trade Awareness Training
  • Explosion Certified Documentation
  • Equipment Manuals

Our ATEX inspections will assist your organisation demonstrate that all installed ATEX electrical and mechanical equipment is certified, has the right protection concept for the potentially explosive atmosphere and is safe to use and fit for purpose.

ATEX Inspection Documentation

  • Certified ATEX Inspections Report (Visual, Close or Detailed Inspections)
  • Certified ATEX Installation Certificate (For Installations by C&P Engineering Services)
  • Ex Register
  • Summary Report – Recommendations, Corrective Actions and Advisory Notes
  • Signed Inspection Check-Sheets in line with BS EN or  IEC 60079-17: 2014
  • Explosion Protection Cerificates/Documents
  • Equipement Manuals

Call +44(0)1792 897002 or email info@nullcpengineering.co.uk for more information and technical assistance

We have been Assessed and Certified by the NICEIC (National Inspection Council for Electrical Installation Contractors) as a Hazardous Area Electrical and Instrumentation Services contractor and we have the technical capability to carry out Electrical and Instrumentation Services work in areas where potentially explosive atmospheres may be expected to occur in the form of explosive gases, vapours or combustible dusts.



ATEX Dust Inspections

Monday, January 12th, 2015

ATEX Dust Inspections

C&P Engineering Services’ specialist and integrated Hazardous Area ATEX electrical services includes ATEX Dust Inspections.  We have significant industry experience and our inspectors are highly qualified and experienced in carrying out dust inspections. All of our inspectors are certified to the CompEx Ex05-Ex06 certification.

We are also a CompEx certified hazardous area training provider for providing candidates with the essential knowledge and practical skills to enable safe working in potentially explosive atmospheres, whether due to flammable gas, combustible dust or other hazards.

ATEX Dust Inspections

Our range of Dust Inspection services include:

  • Developing and Implementing  Strategies for Carrying out ATEX Dust Inspections
  • Visual, Close, & Detailed ATEX Dust Inspections
  • NICEIC Certified Hazardous Area ATEX Dust Inspection Reports
  • NICEIC Certified Hazardous Area ATEX Dust Installation Certificates
  • Compiling Ex Registers and Client Databases for Dust Environments
  • Ensuring Verification of all Installed ATEX Equipment for Dust Installations
  • Ensuring Compliance with all Standards and Regulations
  • Gap Analysis and Reporting of Current ATEX Dust Inspections
  • Explosion Protection Documentation
  • ATEX Dust Inspections, Installation & Maintenance Project Management
  • ATEX Dust Equipment Installation Remedial Repairs
  • High Level Technical Support

Established in 1973, C&P Engineering Services Ltd is an award
winning Electrical and Instrumentation Services contracting
company that has a reputation of minimising risk through safe,
professional and versatile high quality Electrical & Instrumentation
Services.

We deliver hazardous area ATEX Dust  Inspections, installation and
maintenance services for customers across a wide range of
industries.

Over the last forty years we have continually developed and
improved our knowledge base and operational systems to the
point where we are now recognised as one of the UK’s leading
international Electrical and Instrumentation Service contractors,
with projects carried out safely, on time and on budget throughout the world.

For more information, contact us at +44(0)1792 897002 or email: info@nullcpengineering.co.uk

For further information about C&P’s Integrated Electrical Services, please click on one of the links below:



HazardEx London

Sunday, November 30th, 2014

HazardEx London – 26th November 2014

HazardEx London will be the second of four events that C&P Engineering Services is exhibiting at over the following months. HazardEx London is set to take place at The  Innovation & Skills (BIS) Conference Centre in 1 Victoria Street, SW1H 0ET. London is the second series of regional events with others scheduled in the following months at venues in England and Wales. Senior UK HSE and UKPIA staff are already confirmed speakers for these events.

Read More



FPAL Registered Supplier to the Oil and Gas Sector

Saturday, May 24th, 2014

FPAL Registered Supplier

C&P Engineering Services are pleased to announce that we have now become an official FPAL registered supplier to the Oil and Gas sector for the provision of a diverse range of Electrical and Instrumentation onshore and offshore engineering services.

C&P Engineering Services’ supplier number on the FPAL database is: 10054077…Read More



Dow Corning 2013 ‘Contractor of the Year’.

Saturday, May 24th, 2014

Dow Corning 2013 ‘Contractor of The Year’

As a result of our excellent performance and consistent delivery at the Barry site in South Wales, C&P Engineering Services has been named Dow Corning’s 2013 ‘Contractor of the Year’.

The Barry site is one of the largest manufacturing sites operated by Dow Corning worldwide and the most technologically advanced chemical manufacturing site of its kind anywhere in the world. C&P Engineering Services has been delivering dedicated EC&I integrated Engineering Services at the Barry site for over 10 years. Read More…



Shell starts production in deep water Gulf of Mexico

Sunday, February 9th, 2014

Shell starts production from second Mars platform in deep water Gulf of Mexico

Shell today announces it has begun production from the Mars B development through Olympus – the company’s seventh, and largest, floating deep-water platform in the Gulf of Mexico. It is the first deep-water project in the Gulf to expand an existing oil and gas field with significant new infrastructure, which should extend the life of the greater Mars basin to 2050 or beyond. Combined future production from Olympus and the original Mars platform is expected to deliver an estimated resource base of 1 billion barrels of oil equivalent (boe). Read More…



Gulf Coast Pipeline Project

Sunday, February 9th, 2014

Gulf Coast Pipeline Project Begins Delivering Crude Oil To Nederland, Texas

TransCanada Corporation (TSX:TRP) (NYSE:TRP) (TransCanada) announced at approximately 10:45 a.m. CST on January, 22, 2014, the Gulf Coast Pipeline Project began delivering crude oil on behalf of our customers to Texas refineries. The completion of this US$2.3 billion crude oil pipeline provides a safe and direct connection between the important oil hub in Cushing, Oklahoma and delivery points on the U.S. Gulf Coast.

TansCanada Corporation’s President and CEO, Russ Girling commented: This is a very important milestone for TransCanada, our shippers and Gulf Coast refiners who have been waiting for a pipeline to supply oil directly from Cushing,” “This project is a critical, modern piece of American energy infrastructure that allows producers to safely connect growing production with the world’s most efficient refiners on the U.S. Gulf Coast. It also provides those American refineries the opportunity to use more of the crude oil produced in both Canada and the United States for decades to come.”

Read More…