News Archives - Hazardous Area Inspections | Hazardous Area Inspections

News

CompEx Celebrates 25th Anniversary

Thursday, June 7th, 2018

CompEx Celebrates 25th Anniversary – Safety in Hazardous Environments

The CompEx scheme celebrated its 25th anniversary on the 28th May 2018 and celebrated the huge impact it has had on improved safety in the workplace during that time.

CompEx Celebrates 25th Anniversary – The CompEx Scheme came about as a direct result of Lord Cullen’s 13-month investigation into the Piper Alpha tragedy and led to 106 recommendations that transformed the North Sea oil and gas industry into a global leader in safety in these hazardous environments.

The CompEx scheme was launched in 1993 and the phenomenal success of the scheme has been marked with many milestones along the way, with Aberdeen College subsidiary ASET the first commercial centre in 1994, ten years later it was celebrating the 10,000 candidate certificated for Gas & Vapour and in 2010 that number had risen to 25,000. Electronic online examinations were introduced in 2013 and JT Limited took over ownership of the scheme from EEMUA a year later in 2014.

(more…)

Tags: CompEx

ADIPEC 2017

Monday, September 25th, 2017

ADIPEC 2017 – Visit us on stand 8450, hall 8

C&P Engineering Services will be exhibiting at ADIPEC 2017, the Abu Dhabi International Petroleum Exhibition & Conference from the 13th to the 16th November. C&P will be on hand to discuss all of your hazardous area electrical equipment inspection and training requirements. Visit us on stand 8450, hall 8.

C&P assist customers with optimising their Ex asset performance, safety and integrity through delivering the following hazardous area inspection and training services:

Ex Inspection of Existing and New Ex Equipment
Ex Hazardous Area Inspection Strategy Development & Implementation
Compiling Ex Registers and Client Databases
Ensuring Verification of all Installed ‘Ex’ Equipment Databases
Ensuring Compliance with all Standards and Regulations
Gap Analysis and Reporting of Current Ex Inspection Procedures
Explosion Protection Documents
Ex Installation & Maintenance Project Management
Ex Remedial Repairs
Hazardous Area Electrical Training

For more information about our hazardous area inspection, verification, consultancy and training services click here>

Tags: ADIPEC 2017

HazardEx 2017

Friday, January 20th, 2017

HazardEx 2017 Exhibitor: Stand #26 – 2nd & 3rd March 2017

C&P Engineering Services is pleased to announce that it will be exhibiting at HazardEx 2017. The two-day International Conference & Exhibition will be staged 2nd & 3rd March 2017 at The Holiday Inn Hotel, Runcorn, Cheshire, UK.

The HazardEx 2014 Conference and Exhibition is THE networking event for senior staff involved in high hazard industry safety and attendees including senior engineers and safety managers, company directors, product manufacturers, regulators and certification bodies, amongst others to attend.

Find out how C&P Engineering Services can assist you with your requirements for ATEX inspection, verification, installation or consultancy…come and talk to us at HazardEx 2017, Stand #26.

Book Now

About HazardEx 2017

The HazardEx 2014 conference will include presentations by senior HSE Inspectors, UKPIA, and from prominent companies involved in the sector. Subjects will include explosion prevention in mines, the latest IEC electrostatic guidance, DSEAR/ACOP revisions, hazard analysis, process safety standards, functional safety, SILs, ageing assets and maintenance, amongst much else.

Attendees will be engineers from the major process industries including Oil & Gas, Pharmaceutical, Chemical, Energy & Utilities etc. Essentially anywhere dust, vapour or gas can become an explosion risk hazard. To complement the two day conference (fee required, contact us for details), there will be a specialist exhibition alongside with free access, offering a range of products & services to all visitors. The Institute of Measurement & Control will also be running a workshop & seminar for all attendees as part of HazardEx, contact us for details & to register.

Tags: HazardEx 2017

HazardEx Ellesmere Port

Sunday, February 22nd, 2015

HazardEx Ellesmere Port – 25th February 2015

HazardEx Ellesmere Port will be the final of four events that C&P Engineering Services has been exhibiting at over the past 6 months. HazardEx Ellesmere Port is set to take place at The Holiday Inn Hotel, Lower Mersey Street, Ellesmere Port. CH65 2AL on the 25th February 2015. Ellesmere Port is the final UK regional event. Senior UK HSE and UKPIA staff are already confirmed speakers for these events. ATEX & DSEAR.

The conference is aimed at hazardous operations personnel in the process industries such as the oil & gas, pharmaceutical, chemical, utilities, new energy and food & beverage industries.

Inspection – Verification – Installation – Modification – Repair

Tags: ATEX, C&P Engineering Services, DSEAR, HazardEx Ellesmere Port 2015

HazardEx Swansea

Wednesday, December 3rd, 2014

HazardEx Swansea – 28th January 2015

HazardEx Swansea will be the third of four events that C&P Engineering Services has been exhibiting at over the following months. HazardEx Swansea is set to take place at The Village Hotel, Swansea, SA1 8QY on the 28th January 2015. Swansea is the third series of regional events with the final event scheduled in Ellesmere Port on the 25th February 2015. Senior UK HSE and UKPIA staff are already confirmed speakers for these events. ATEX & DSEAR

Tags: ATEX Inspections, HazardEx Swansea

HazardEx London

Sunday, November 30th, 2014

HazardEx London – 26th November 2014

HazardEx London will be the second of four events that C&P Engineering Services is exhibiting at over the following months. HazardEx London is set to take place at The Innovation & Skills (BIS) Conference Centre in 1 Victoria Street, SW1H 0ET. London is the second series of regional events with others scheduled in the following months at venues in England and Wales. Senior UK HSE and UKPIA staff are already confirmed speakers for these events.

Tags: C&P Engineering Services, HazardEx London

HazardEx Aberdeen

Wednesday, September 24th, 2014

HazardEx Aberdeen – 8th October 2014

HazardEx Aberdeen will be the first of four events that C&P Engineering Services is exhibiting at over the following months. HazardEx Aberdeen is set to take place at The Airport Thistle Hotel on the 8th October 2014. Aberdeen is the first series of regional events with others scheduled in the following months at venues in England and Wales. Senioe UK HSE and UKPIA staff are already confirmed speakers for these events, and further details of the event can be found here. ATEX & DSEAR

Inspection – Verification – Installation – Modification – Repair

Visit us at the C&P Stand! HazardEx Aberdeen

Tags: ATEX, DSEAR, HazardEx Aberdeen, Hazardous Area Inspections

ExPro Talk 2014

Thursday, July 17th, 2014

ExPro Talk London 2014 – 26th & 27th June

ExPro Talk London 2014 will bring together senior executives from across the globe and from the exploration and production remit of oil & gas to participate for a series of debates and discussions on some of the key issues faced within the industry today.

C&P Engineering Services is a Sponsor at Expro Talk London 2014 and will be delivering a workshop and presentation on ‘Managing Ex Asset Integrity’.

Day 1: Workshop 4 ‘ Managing Ex Asset Integrity’
Date: June 26
Time: 16:00 – 16:30 GMT

C&P Supports the ECITB Service Leavers Event

Wednesday, June 11th, 2014

C&P Engineering Services Supports the ECITB Service Leavers Event

C&P Engineering Services supported and exhibited at the careers fair for service leavers at the Royal Academy of Engineering in London, on Thursday 5th June 2014. The event was held in conjunction with the ECITB and Talent Retention Solution (TRS) and was supported by the Careers Transition Partnership (CTP)...READ MORE ABOUT THIS NEWS ARTICLE

Tags: E&I, ECITB Service Leavers, Hazardous Area Inspections, Royal Academy of Engineering

Two Safety Awards